Yahoo奇摩 網頁搜尋

搜尋結果

  1. 傳統原子力顯微鏡大多使用光槓桿原理,而教育型原子力顯微鏡使用像散式光路偵測探針位移,此教育型原子力顯微鏡由台灣中央研究院物理研究所胡恩德博士設計並製作。 使用電路板作結構之概念源自:Sebastian Buetefisch. 显微镜可让我们看到肉眼无法观察的结构,实在是太棒了! 光学显微镜能看到微米等级(1/1,000毫米)结构,然而原子力显微镜更可让我们看到納米 (1/1,000,000毫米)结构。 一般的原子力显微镜动辄数万至数十万美元,只有研究机构可以负担得起。

    • 檀健次1
    • 檀健次2
    • 檀健次3
    • 檀健次4
    • 檀健次5
  2. By ArduinoDeXXX. More by the author: arduinoを使った工作を幾つかやった後、倒立振子の作成を思い立ちました。. 今回の方針はの2つです。. 極力シンプルな構成. 自力で作る (webの先人に頼らない). 立たせるのにまるまる1週間以上かかりましたが、なんとか当初の ...

    • 檀健次1
    • 檀健次2
    • 檀健次3
    • 檀健次4
  3. Solution: Avrdude Stk500_getsync (): Not in Sync Resp=0x30 Error for Arduino: So the reader is aware: This article covers the main causes for this issue, but some of the other Instructable users have found somewhat "niche" causes to the issue that were not covered in this article and are discussed in the comment section below….

    • Controlling The Exact Pulse Time
    • More Servos
    • Continuous Rotation Servos

    Arduino has a built-in function servo.write(degrees)that simplifies the control of servos. However, not all servos respect the same timings for all positions. Usually, 1 millisecond means 0 degrees, 1.5 milliseconds mean 90 degrees, and, of course, 2 milliseconds mean 180 degrees. Some servos have smaller or larger ranges. For better control, we ca...

    In order to use more than one servo, we need to declare multiple servo objects, attach different pins to each one, and address each servo individually. First, we need to declare the servo objects—as many as we need: Then we need to attach each object to one servo motor. Remember, every servo motor uses an individual pin: In the end, we just have to...

    There is a special breed of servos labelled as continuous rotation servos. While a normal servo goes to a specific position depending on the input signal, a continuous rotation servo either rotates clockwise or counter-clockwise at a speed proportional to the signal. For example, the Servo1.write(0) function will make the servomotor spin counter-cl...

  4. Coding Timers and Delays in Arduino: 20th Dec 2021 update: added PinFlasher class and example (included in SafeString library V4.1.13+) 6th Jan 2020 update: The millisDelay class is now part of the SafeString library V3+. Download SafeString from the Arduino Library manager or from it….

  1. 其他人也搜尋了