Yahoo奇摩 網頁搜尋

搜尋結果

  1. en.wikipedia.org › wiki › GearGear - Wikipedia

    Spur Spur gear Spur gears or straight-cut gears are the simplest type of gear. They consist of a cylinder or disk with teeth projecting radially. Though the teeth are not straight-sided (but usually of special form to achieve a constant drive ratio, mainly involute but less commonly cycloidal), the edge of each tooth is straight and aligned parallel to the axis of rotation.

  2. Transmission (mechanical device) A transmission (also called a gearbox) is a mechanical device which uses a gear set —two or more gears working together—to change the speed or direction of rotation in a machine. [1] [2] Many transmissions have multiple gear ratios, but there are also transmissions that use a single fixed-gear ratio.

  3. en.wikipedia.org › wiki › Bevel_gearBevel gear - Wikipedia

    Bevel gear. Bevel gears are gears where the axes of the two shafts intersect and the tooth -bearing faces of the gears themselves are conically shaped. Bevel gears are most often mounted on shafts that are 90 degrees apart, but can be designed to work at other angles as well. [1] The pitch surface of bevel gears is a cone, known as a pitch cone.

  4. Epicyclic gearing or planetary gearing is a gear system consisting of one or more outer, or planet, gears or pinions, revolving about a central sun gear or sun wheel. [4] [5] Typically, the planet gears are mounted on a movable arm or carrier, which itself may rotate relative to the sun gear.

  5. Strain wave gearing (also known as harmonic gearing) is a type of mechanical gear system that uses a flexible spline with external teeth, which is deformed by a rotating elliptical plug to engage with the internal gear teeth of an outer spline. The German company Harmonic Drive SE manufactured the first series-produced gears under the product ...

  6. Pressure angle in relation to gear teeth, also known as the angle of obliquity, [1] is the angle between the tooth face and the gear wheel tangent. It is more precisely the angle at a pitch point between the line of pressure (which is normal to the tooth surface) and the plane tangent to the pitch surface. The pressure angle gives the direction ...

  7. Herringbone gear. A herringbone gear, a specific type of double helical gear, [1] is a side-to-side, rather than face-to-face, combination of two helical gears of opposite hands. [2] From the top, each helical groove of this gear looks like the letter V, and many together form a herringbone pattern (resembling the bones of a fish such as a ...